-
Rotary Slip Ring
-
Capsule Slip Ring
-
Signal Slip Rings
-
Fiber Optic Rotary Joint
-
High Frequency Slip Rings
-
Through Hole Slip Ring
-
Separate Slip Ring
-
Pancake Slip Ring
-
High Current Slip Rings
-
Slip Ring Components
-
Non Mercury Slip Ring
-
Pneumatic Hydraulic Rotary Joints
-
Integrated Slip Ring
-
Slip Ring Solutions
-
WilliamJINPAT Slip ring appearance is good, packing carefully, service enthusiasm, need to come again
-
MartinFast delivery, good performance and good quality, looking forward to the next cooperation.
Through Hole Slip Ring
LPT series are through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.
Operating Speed: : 0-300rpm
Working Temperature: : 60%RH
Contact Material: : Precious Metal
Protection Grade: : IP54 Or Higher
Contact Material: : Precious Metal
Working Humidity: : ≤60%RH
Circuits: : 2 Circuits
Operating Speed: : 0-300rpm
Number Of Circuits: : 22
Working Speed: : 1000rpm
Voltage Rating: : 420VAC/DC
Hole Size: : 80 Mm
Number Of Circuits: : 6
Current Rating: : 15A Per Wire
Working Speed: : 0~300rp
Contact Material: : Precious Metal
Working Speed: : 0~300rpm
Rotor: : 300mm
Operating Speed: : 0-500rpm
Working Temperature: : -20℃~ +60℃
Current Rating: : 5A Per Circuit
Inner Size: : 12.7mm
Working Speed: : 0~300rp
Contact Material: : Precious Metal